- Rated Power: 1000W
- Battery Voltage: 12/24VDC
- PV Charge Current: 50A
| MODEL | OSB20-1012 Pro | OSB20-1024 Pro | |
|---|---|---|---|
| Battery Input Voltage Rating | 12VDC | 24VDC | |
| INVERTER OUTPUT | |||
| Rated Power | 1000W | 1000W | |
| Instantaneous Power Drawn (20ms) | 3000W | 3000W | |
| Output Waveform | Pure sine wave | ||
| Output Voltage | 230VAC(+/-10% RMS) | ||
| Output Frequency | 50Hz/60Hz +/-1 Hz | ||
| Inverting Efficiency (peak) | >80% | ||
| Mains Mode Efficiency | > 95% | ||
| Transfer Time | Typical 2~6ms 10ms(max) | ||
| AC INPUT | |||
| Input Voltage | 220/230/240VAC, | ||
| Input Voltage Range | 140~280VAC(For Personal Computers) | ||
| Low Pressure Shutdown | 140VAC+/-5 | ||
| Low Response | 150VAC+/-5 | ||
| High Pressure Shutdown | 280VAC+/-5 | ||
| High Pressure Reply | 270VAC+/-5 | ||
| Low Shutdown | 45+/-1Hz | ||
| Low Frequency Response | 46+/-1Hz | ||
| High Frequency Shutdown | 65+/-1Hz | ||
| High-frequency Response | 64+/-1Hz | ||
| Frequency Range | 50Hz/60Hz | ||
| BATTERY | |||
| Minimum Start Voltage | Battery under voltage shut-down point +0.5V | Battery under voltage shut-down point +1.0V | |
| Low Battery Alarm | Battery under voltage shut-down point +0.5V | Battery under voltage shut-down point +1.0V | |
| Low Battery Shutdown | (0.1V 1 10-12.0VDC mode) User set | (0.2V 1 20.0-24.0VDC mode) User set | |
| Battery High Voltage Alarm | Voltage settings are +0.5V | Voltage settings are +1.0V | |
| High Battery Voltage Recover | Battery Under voltage shut-down point +0.5V | Battery Under voltage shut-down point +0.5V | |
| AC CHARGER | |||
| Float Voltage | 13.5 13.6 13.7VDC to set | 27.0 27.2 27.4VDC to set | |
| Average Charge Voltage | (0.1V 1 13.8~14.5V mode) User set | (0.2V 1 27.6~29V mode) User set | |
| Maximum Charge Current | 30A +/-3 A High-efficiency | 15A +/-3 A High-efficiency | |
| BYPASS & PROTECTION | |||
| Input Voltage Waveform | Sine wave | ||
| Input Frequency | 50Hzor60hz | ||
| Low Frequency Switching | 45+/-1HZ MIN | ||
| High Frequency Switching | 65+/-1HZ | ||
| Overload Protection | 110%~125%R load fault after 30s; 125% ~150%R load fault after 3s; >150%R load fault after 500ms | ||
| Output Short Circuit Protection | Yes | ||
| Bypass Circuit Breaker Insurance | 10A | ||
| Maximum Current Bypass | 10A | ||
| SOLAR CHARGER | |||
| Maximum PV Charge Current | 50A | ||
| Battery Voltage | Auto amplitude work | ||
| Maximum PV Array Power | 150W*5 solar panels | 150W*10 solar panels | |
| MPPT Operating Voltage Range | 16~60VDC | ||
| Maximum PV Array Open Circuit Voltage | 60Vdc | ||
| Maximum Efficiency | > 95% | ||
| Standby Consumption | <2W | ||
| MECHANICAL SPECIFICATIONS | |||
| Assembly | Wall mount | ||
| Dimension (W*H*D) (mm) | 301*328*132 | ||
| Net Weight (Solar Charge)kg | 10.25 | ||
| Shipping Dimensions (mm) | 395*328*190 | ||
| Transport Weight KG | 11.0 | ||
| OTHER | |||
| Working Environment | 0° C~40 0~90%°C Relative humidity ( ) not dew. | ||
| Noise | Less than 60db | ||
| Display | LED + LCD | ||